P1070382
The base plates. Made from 6mm hard alloy (AlZnMgCu1,5).Size 245 x 100 mm, cut, width at the end : 60mm.10mm hole for the adapter's screws, additional 6mm holes to fix the wedges. 7mm holes for board fixations (in 40x40mm distances) - 5 times in 10m.
Date : 01/01/2012
Propriétaire : Guido Ludwig
Affichages : 13402
|
P1070389
The wedges. Made from 70 x 60 mm alloy (AlCuMgPb), 2 x 10mm for the front foot, 5 mm + 15 mm for the rear foot.Filed a small channel for the F2 adapters.10mm hole for the adapter's screws, 6mm screw thread for fixation to the base plate.
Date : 01/01/2012
Propriétaire : Guido Ludwig
Affichages : 13529
|
P1070391
wedges mounted on base plate.
Date : 01/01/2012
Propriétaire : Guido Ludwig
Affichages : 13679
|