SkwalZone

THOR GLOVES..., give it a try...

From method to the skwal gear, here's the place!

Moderator: WebTeam

Re: THOR GLOVES..., give it a try...

Postby pete » 11 Jan 2013 15:14

Look at the chart, it seems quite accurate (leaving some space if you're at the beginning of a size) :
Image
User avatar
pete
High Rank Member
 
Posts: 1842
Joined: 15 Jan 2003 06:06
Location: Québec (Québec), CANADA

Re: THOR GLOVES..., give it a try...

Postby Rascasse » 25 Jan 2017 10:50

Some interesting advice from the Thor Gloves company regarding temperature enhancements on former models such as SR-4 + new waterproof models. For more info, please feel free to contact John at the email address listed on the following web page http://www.texashuntingnews.com/THOR.htm Finally, please be aware that they will have a spring order program on the SR-6 Model and are in transition to a new factory, so needs to make orders
to meet the minimum order at the new factory. So please feel free to share his message and place orders (if your need to change your pair of gloves) so they can keep making these great gloves for all of us:

When I designed this SR-4, I lived in California and the temperatures do not get as cold as The Alps
or even in Colorado Rockies. SO, I did not use a waterproof membrane in these gloves.
The new gloves has this membrane.

SO, I highly recommend a very thin polypropylene liner glove to wear if 20 F ( - 7 C ) or below.

I also would advise perhaps spraying the backside fingers with clear enamel spray paint as a wind shield.

If you have Clear Spray Polyurethane in your hardware stores, this is a great thing to spray on the palms
and fingers and especially places of high abrasion. Polyurethane also comes in a small can (liquid).
User avatar
Rascasse
High Rank Member
 
Posts: 143
Joined: 11 Dec 2008 18:00

Previous

Return to Technical discussions

Who is online

Users browsing this forum: No registered users and 1 guest

cron

Copyright© 2002-2003 skwalzone.org   -   nommam2000@yahoo.fr